#!/bin/sh -x ########################################################################## # # Portable Firefox OS X # $Revision: 4.1 # # The Contents of this file are made available subject to the terms # of the following license # # - GNU General Public License Version 3 # # Carlo Gandolfi, Paolo Portaluri January 2010 # # GNU General Public License Version 3 # ============================================= # Copyright 2006-2011 by: # Carlo Gandolfi - http://www.freesmug.org # Paolo Portaluri - http://plus2.it/~paolo/ # # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation, either version 3 of the License, or # any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. # ########################################################################## # Portable Firefox OS X # Revision: 4.1.3 # Modified by Erik T Ashfolk <atErik at Out Look dot com> # ______ <______ at ________ dot ___> # to use Pashua dialog (instead of CocoaDialog) & new Platypus, etc # for 64bit macOSX (Catalina,...) compatibility. # # The Contents of this file are made available subject to the terms # of the following license+restrictions+permissions: # - GNU General Public License Version 3 (GPL v3) # - Do not use my/our contributions to kill/harm(or steal-from) any Human/Community,Earth,etc # Copyright (c) 2020 by Erik T Ashfolk - <atErik at Out Look dot com> # ... # # GPL v3 # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation, either version 3 of the License, or # any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/license/>. # ################################################################################# # Reset PATH PATH=/bin:/sbin:/usr/bin:/usr/sbin export PATH appID=Firefox appBin=firefox-bin # Modified by atErik : Changed below from "userprefbase" into "userPref" userPref="Library/Application Support" # Modified by atErik : Changed below from "userpref" into "userPrefBase" userPrefBase="$HOME/$userPref/$appID/Profiles" # export userPrefBase userCacheBase="$HOME/Library/Caches" userCache="$userCacheBase/$appID" PA_userBase="$1/Contents/Resources" # export PA_userBase PA_userPref="$PA_userBase/profile" copy_pref="$PA_userBase/CopyPref_Done" CD="$PA_userBase/CocoaDialog.app/Contents/MacOS/CocoaDialog" # export CD # Added/Modified by atErik, to use Pashua (instead of CocoaDialog) PD="$PA_userBase/Pashua.app/Contents/MacOS/Pashua"; # export PD appICON="$PA_userBase/appIcon.icns" # export appICON cautionICON="$PA_userBase/P_${appID}_Caution.icns" # export cautionICON # Below line added by atErik, to use bash-functions inside "pashua.sh" file: # source "$PA_userBase/pashua.sh" # when above line is enabled, then below 2-functions are not necessary to enable here. # Temporarily including below 2-functions from "pashua.sh": # ======================================================== # This section/function copied from Pashua example.sh file # Pashua’s source code is released under the Open Source Software (3-clause BSD license) # # Tries to find the Pashua executable in one of a few default search locations or in # a custom path passed as optional argument. When it can be found, the filesystem # path will be in $pashuapath, otherwise $pashuapath will be empty. The return value # is 0 if it can be found, 1 otherwise. # # Argument 1: Path to a folder containing Pashua.app (optional) # ======================================================== locate_pashua() { local bundlepath="Pashua.app/Contents/MacOS/Pashua" local mypath=`dirname "$0"` pashuapath="" if [ ! "$1" = "" ] then searchpaths[0]="$1/$bundlepath" fi searchpaths[1]="$mypath/Pashua" searchpaths[2]="$mypath/$bundlepath" searchpaths[3]="./$bundlepath" searchpaths[4]="/Applications/$bundlepath" searchpaths[5]="$HOME/Applications/$bundlepath" for searchpath in "${searchpaths[@]}" do if [ -f "$searchpath" -a -x "$searchpath" ] then pashuapath=$searchpath return 0 fi done return 1 } # ======================================================== # This section/function copied from Pashua example.sh file # Pashua’s source code is released under the Open Source Software (3-clause BSD license) # # Function for communicating with Pashua # # Argument 1: Configuration string # Argument 2: Path to a folder containing Pashua.app (optional) # ======================================================== pashua_run() { # Write config file local pashua_configfile=`/usr/bin/mktemp /tmp/pashua_XXXXXXXXX` echo "$1" > "$pashua_configfile" locate_pashua "$2" if [ "" = "$pashuapath" ] then >&2 echo "Error: Pashua could not be found" exit 1 fi # Get result local result=$("$pashuapath" "$pashua_configfile") # Remove config file rm "$pashua_configfile" oldIFS="$IFS" IFS=$'\n' # Parse result for line in $result do local name=$(echo $line | sed 's/^\([^=]*\)=.*$/\1/') local value=$(echo $line | sed 's/^[^=]*=\(.*\)$/\1/') eval $name='$value' done IFS="$oldIFS" } # ======================================================== # CDokMsg # Modified by atErik : local, "--yes-cancel"/$3, $4/tooltip/tV # CocoaDialog Ok/Cancel message box # $1 "text" # $2 "informative text" # $3 optional "--no-cancel" = don't show a cancel button, & "--yes-cancel" to show a Cancel button # $4 optional "tooltip_img|tooltip_text|tooltip_okButton|tooltip_cancelButton", or specify "-" to show no-tooltip # ======================================================== function CDokMsg { # Modified by atErik : local, "--yes-cancel"/$3, tV/$4/tooltip local tV="" local conf=" # Set window title *.title = $1 # show an image imgOk.type = image imgOk.x = 50 imgOk.y = 50 imgOk.maxwidth = 64 imgOk.path = $appICON # Introductory text txtOk.type = text txtOk.default = $2 txtOk.height = 180 txtOk.width = 310 txtOk.x = 50 txtOk.y = 120 # Show an “Ok” general-button at default position okB.type = button okB.label = Ok " # we will not specify okB.x or okB.y in above, # so that macOSX can place this general-button at-default position, left-bottom corner if [ ! -z $3 ] ; then if [ "$3" == "--yes-cancel" ] ; then conf="$conf # Add a “Cancel” button with default-label & show in default-positon okCB.type = cancelbutton " fi; fi; if [ ! -z $4 ] ; then if [ "$4 " != " " ] ; then if [ "${4%%|*}" != "-" ] ; then # tooltip msg for image conf="$conf imgOk.tooltip = ${4%%|*} " fi; tV=${4#*|} if [ "${tV%%|*}" != "-" ] ; then # tooltip msg for text conf="$conf txtOk.tooltip = ${tV%%|*} " fi; tV=${tV#*|} if [ "${tV%%|*}" != "-" ] ; then # tooltip msg for a button showing “Ok” conf="$conf okB.tooltip = ${tV%%|*} " fi; if [ ! -z $3 ] ; then if [ "$3" == "--yes-cancel" ] ; then tV=${tV#*|} if [ "${tV%%|*}" != "-" ] ; then # tooltip msg for a button showing “Cancel”/etc conf="$conf okCB.tooltip = ${tV%%|*} " fi; fi; fi; fi; fi; beep pashua_run "$conf" "$PA_userBase" # beep # "$CD" ok-msgbox --icon-file "$appICON" \ # --text "$1" --informative-text "$2" "$3" } function CDokMsgC { # Modified by atErik : local, "--yes-cancel"/$3, tV/$4/tooltip local tV="" local conf=" # Set window title *.title = $1 # show an image imgOkC.type = image imgOkC.x = 50 imgOkC.y = 50 imgOkC.maxwidth = 64 imgOkC.path = $cautionICON # Introductory text txtOkC.type = text txtOkC.default = $2 txtOkC.height = 180 txtOkC.width = 310 txtOkC.x = 50 txtOkC.y = 120 # Show an “Ok” general-button at default position bOkC.type = button bOkC.label = Ok " # we will not specify okb.x or okb.y in above, # so that macOSX can place this general-button at-default position, left-bottom corner if [ ! -z $3 ] ; then if [ "$3" == "--yes-cancel" ] ; then conf="$conf # Add a “Cancel” button with default-label & show in default-positon cbOkC.type = cancelbutton " fi; fi; if [ ! -z $4 ] ; then if [ "$4 " != " " ] ; then if [ "${4%%|*}" != "-" ] ; then # tooltip msg for image conf="$conf imgOkC.tooltip = ${4%%|*} " fi; tV=${4#*|} if [ "${tV%%|*}" != "-" ] ; then # tooltip msg for text conf="$conf txtOkC.tooltip = ${tV%%|*} " fi; tV=${tV#*|} if [ "${tV%%|*}" != "-" ] ; then # tooltip msg for a button showing “Ok” conf="$conf bOkC.tooltip = ${tV%%|*} " fi; if [ ! -z $3 ] ; then if [ "$3" == "--yes-cancel" ] ; then tV=${tV#*|} if [ "${tV%%|*}" != "-" ] ; then # tooltip msg for a button showing “Cancel”/etc conf="$conf cbOkC.tooltip = ${tV%%|*} " fi; fi; fi; fi; fi; beep pashua_run "$conf" "$PA_userBase" # beep # "$CD" ok-msgbox --icon-file "$cautionICON" \ # --text "$1" --informative-text "$2" "$3" } function beep { /usr/bin/osascript << EOT tell application "Finder" beep end tell EOT } # ======================================================== # PDbubble # Written by atErik, to use Pashua (instead of CocoaDialog) # $1 "title text" # $2 "message or informative text" # $3 "icon/image path" # $4 "autoCloseTime" is interger-numbers as seconds, or "-" for no-autoCloseTime # when "-" is specified as $4 then "Ok"-button will be shown # $5 "tooltip_image" msg : shows this msg when UI-pointer hovers/moves over the image shown in bubble-msg box, # or specify "tooltip_image|tooltip_text|tooltip_okButton", or specify "-" or "-|-|-" to show no-tooltip # $6 "bm1"/"bm2"/... indicating dialog/bubble-message box at different positions, # (and textbox inside "bmN" msgbox can have different size & position) # Use differnet numbered "bmN" bubble/dialog msg box, so that msgbox is shown without overlapping, # or specify "bm1|bm1_x_position|bm1_y_position|text_height|text_width||text_x_position|text_y_position" # ======================================================== function PDbubble { # Written by atErik, to use Pashua (instead of CocoaDialog) # NOTES: The GUI elements are displayed in the order in which they appear in the config string. # The only exception to this rule are buttons: the default button is always in the lower right # corner of the window, the cancel button (if defined) is located left to the default button # and any other buttons will appear in the lower left corner, from left to right, in the order # they were defined. local tV="" local conf=" # Set window title *.title = $1 # show an image imgBbl.type = image imgBbl.x = 50 imgBbl.y = 50 imgBbl.maxwidth = 64 imgBbl.path = $3 # Introductory text txtBbl.type = text txtBbl.default = $2 " if [ ! -z $4 ] ; then # $4 is either "-" or "integer-NUMBER" if [ "$4" != "-" ] ; then conf="$conf # add a auto close timeout in seconds, for this shown dialog/bubble/msg box *.autoclosetime = $4 " else if [ "$4" == "-" ] ; then conf="$conf # Show an “Ok” general-button at default-position BokBbl.type = button BokBbl.label = Ok " # we will not specify okb.x or okb.y in above, # so that macOSX can place this general-button at-default position, left-bottom corner fi; fi; fi; if [ ! -z $5 ] ; then if [ "$5 " != " " ] ; then # "tooltip_image|tooltip_text|tooltip_okButton" or "-" or "-|-|-" if [ "$5" != "-" ] && [ "$5" != "-|-|-" ] ; then if [ "${5%%|*}" != "-" ] ; then # tooltip msg for image conf="$conf imgBbl.tooltip = ${5%%|*} " fi; tV=${5#*|} if [ "${tV%%|*}" != "-" ] ; then # tooltip msg for text conf="$conf txtBbl.tooltip = ${tV%%|*} " fi; if [ "$4" == "-" ] ; then tV=${tV#*|} if [ "${tV%%|*}" != "-" ] ; then # tooltip msg for a button showing “Ok” conf="$conf BokBbl.tooltip = ${tV%%|*} " fi; fi; fi; fi; fi; tV="" if [ ! -z $6 ] ; then # "bm1|bm1_x_position|bm1_y_position|text_height|text_width||text_x_position|text_y_position" if [ "${6:3:1}" == "|" ] ; then tV="${6:4}" conf="$conf # bmN dialog msg box's vertical x position *.x = ${tV%%|*} " tV=${tV#*|} conf="$conf # bmN dialog msg box's horizontal y position *.y = ${tV%%|*} " tV=${tV#*|} conf="$conf # height of text box/area inside bmN msgbox txtBbl.height = ${tV%%|*} " tV=${tV#*|} conf="$conf # width of text box/area inside bmN msgbox txtBbl.width = ${tV%%|*} " tV=${tV#*|} conf="$conf # vertical x position of text box/area inside bmN msgbox txtBbl.x = ${tV%%|*} " tV=${tV#*|} conf="$conf # horizontal y position of text box/area inside bmN msgbox txtBbl.y = ${tV%%|*} " else conf="$conf # vertical & horizontal position of text box inside bubble/dialog msg box txtBbl.x = 50 txtBbl.y = 120 # height & width of text box inside bubble/dialog msg box txtBbl.height = 100 txtBbl.width = 310 " case "${6:0:3}" in ('bm1') # adding a fixed/specific vertical & horizontal position, to show the “bm1” bubble/dialog msg box conf="$conf # vertical & horizontal position of “bm1” bubble/dialog msg box *.x = 50 *.y = 400 " ;; ('bm2') # adding a fixed/specific vertical & horizontal position, to show the “bm2” bubble/dialog msg box conf="$conf # vertical & horizontal position of “bm2” bubble/dialog msg box *.x = 200 *.y = 400 " ;; ('bm3') # adding a fixed/specific vertical & horizontal position, to show the “bm3” bubble/dialog msg box conf="$conf # vertical & horizontal position of “bm3” bubble/dialog msg box *.x = 350 *.y = 400 " ;; ('bm4') # adding a fixed/specific vertical & horizontal position, to show the “bm4” bubble/dialog msg box conf="$conf # vertical & horizontal position of “bm4” bubble/dialog msg box *.x = 500 *.y = 400 " ;; esac; fi; else conf="$conf # vertical & horizontal position of text box inside bubble/dialog msg box txtBbl.x = 50 txtBbl.y = 120 # height & width of text box inside bubble/dialog msg box txtBbl.height = 100 txtBbl.width = 310 " # We are not adding *.x & *.y in above, # so that MacOS can show this bubble/dialog msg box in its default position fi; beep pashua_run "$conf" "$PA_userBase" } # ======================================================== # PDfileOrDirSelect # Written by atErik, to use Pashua (instead of CocoaDialog) # $1 "title text" # $2 "label or informative text" # $3 "dirOrFileLocation" = path/directoryOrFile location # $4 "fileTypeExtension or directory" = if its "directory" then only "directory" selection is allowed, # if its filetypes (i.e: "jpg gif") then that/those fileType(s) selection is/are allowed # $5 optional "tooltip_img|tooltip_txt|tooltip_fileBrowser|tooltip_okButton|tooltip_cancelButton" # or specify "-" to show no-tooltip # ======================================================== function PDfileOrDirSelect { # Written by atErik, to use Pashua (instead of CocoaDialog) local tV="" local conf=" # Set window title *.title = $1 # show an image imgSlct.type = image imgSlct.x = 50 imgSlct.y = 50 imgSlct.maxwidth = 64 imgSlct.path = $appICON # Introductory text txtSlct.type = text txtSlct.default = $2 txtSlct.height = 100 txtSlct.width = 310 txtSlct.x = 50 txtSlct.y = 120 # Add a filesystem browser (openFileOrDirBrowser) SlctFB.type = openbrowser SlctFB.label = $2 # SlctFB.label = Example filesystem browser (textfield + open panel) SlctFB.width=380 SlctFB.height=350 SlctFB.default = $3 SlctFB.x = 180 SlctFB.y = 50 # Add a “Cancel” button with default-label & show at default-positon SlctCB.type = cancelbutton # Show an “Ok” general-button at default-position SlctOkB.type = button SlctOkB.label = Ok " # we will not specify SlctOkB.x or SlctOkB.y in above, # so that macOSX can place this general-button at-default position, left-bottom corner if [ ! -z $4 ] ; then # setting by-default mode to select "directory": if [ "$4" != "directory" ] ; then conf="$conf # user-specified fileTypes selection is allowed SlctFB.filetype = $4 " else conf="$conf # only-directory selection is allowed SlctFB.filetype = directory " fi; else fi; if [ ! -z $5 ] ; then if [ "$5 " != " " ] ; then if [ "${5%%|*}" != "-" ] ; then # tooltip msg for img conf="$conf imgSlct.tooltip = ${5%%|*} " fi; tV=${5#*|} if [ "${tV%%|*}" != "-" ] ; then # tooltip msg for text conf="$conf txtSlct.tooltip = ${tV%%|*} " fi; tV=${tV#*|} if [ "${tV%%|*}" != "-" ] ; then # tooltip msg for openFileOrDirBrowser conf="$conf SlctFB.tooltip = ${tV%%|*} " fi; tV=${tV#*|} if [ "${tV%%|*}" != "-" ] ; then # tooltip msg for a button showing “Ok” conf="$conf SlctOkB.tooltip = ${tV%%|*} " fi; tV=${tV#*|} if [ "${tV%%|*}" != "-" ] ; then # tooltip msg for a button showing “Cancel”/etc conf="$conf SlctCB.tooltip = ${tV%%|*} " fi; fi; fi; beep pashua_run "$conf" "$PA_userBase" } # ======================================================== # PDmultiButtons # Written by atErik, to use Pashua (instead of CocoaDialog) # $1 "title text" # $2 "label or informative text" # $3 "app icon/image path" = path/directory location # $4 "buttonN_Show_Text" : when 4th & next items begin with "button1_", "button2_", etc, THEN # : text-specified after the 1st "_" will be displayed in the shown-button # : other-than 1st "_", all other "_" will be converted into "space" symbol # ======================================================== function PDmultiButtons { # Written by atErik, to use Pashua (instead of CocoaDialog) local tV="" local conf=" # Set window title *.title = $1 # show an image imgMB.type = image imgMB.x = 50 imgMB.y = 50 imgMB.maxwidth = 64 imgMB.tooltip = This is an element of type “image” imgMB.path = $appICON # Introductory text txtMB.type = text txtMB.default = $2 txtMB.height = 180 txtMB.width = 310 txtMB.x = 50 txtMB.y = 120 txtMB.tooltip = This is an element of type “text” " if [ ! -z $4 ] ; then if [ "${4:0:8}" == "button1_" ] ; then tV="${4:8}"; # get all text after the 1st-underscore symbol tV=${tV//_/ }; # change all "underscore" into "space" character/symbol conf="$conf # add a button with user-specified text gb1MB.type = button gb1MB.label = $tV gb1MB.x = 260 gb1MB.y = 50 " fi fi; if [ ! -z $5 ] ; then if [ "${5:0:8}" == "button2_" ] ; then tV="${5:8}" tV=${tV//_/ } conf="$conf # add another button with user-specified text gb2MB.type = button gb2MB.label = $tV gb2MB.x = 260 gb2MB.y = 140 " fi fi; if [ ! -z $6 ] ; then if [ "${6:0:8}" == "button3_" ] ; then tV="${6:8}" tV=${tV//_/ } # "Configuration error: Element “gb3” lacks a type attribute. In other words: you have to add a line like the following one: gb3.type = textfield" conf="$conf # add another button with user-specified text gb3MB.type = button gb3MB.label = $tV gb3MB.x = 260 gb3MB.y = 240 " fi fi; if [ ! -z $7 ] ; then if [ "${7:0:8}" == "button4_" ] ; then tV="${7:8}" tV=${tV//_/ } conf="$conf # add another button with user-specified text, in another row, under the previous 3-buttons gb4MB.type = button gb4MB.label = $tV gb4MB.x = 300 gb4MB.y = 50 " fi fi; beep pashua_run "$conf" "$PA_userBase" } # ======================================================== # PDprogressBarDirsFilesCpOrMv # Written by atErik, to use Pashua (instead of CocoaDialog) # $1 "Operation | title text" : Operation can be "Copy" or "Move" : either Copy or Move operation # "title text" part is for displaying given text on title of the shown dialog box # $2 "Source Folder/File" # $3 "Destination Folder/File" # $4 "Elapsed_Time | Refresh_Time" : Files+Dirs ReCounting Event Occurred How Many Seconds After Beginning # "RefreshTime" is indicating the time after which current dialog box is removed, & new updated is shown # $5 "extra info 1" : Multi Lines are separated by "|" symbol , use "-" to keep it empty # $6 "extra info 2" : use "-" to keep it empty # $7...$9 : format: "ProgressBAR/PERCENT_NUMBER|nominatorNumber|denominatorNumber" # $7 is for Files, $8 is for Directories, $9 is for Size # ======================================================== function PDprogressBarDirsFilesCpOrMv { local tV="" Src="" Dest="" oped="copied" tymP="" local cp=1 tymPsd=0 p1=0 p1n=0 p1d=0 p2=0 p2n=0 p2d=0 p3=0 p3n=0 p3d=0 local L1="" L2="" L3="" L4="" L5="" L6="" L7="" L8="" L9="" local conf="" # local CpOrMv="" if [ ! -z $1 ] ; then tV=${1%%|*} if [ "$tV" == "Move" ]; then # CpOrMv="mv" cp=0 #elif [ "$tV" == "Copy" ]; then # CpOrMv="cp -R" fi conf=" # Set window title *.title = ${1#*|} " fi if [ ! -z $2 ] ; then Src=$2 fi if [ ! -z $3 ] ; then Dest=$3 fi if [ ! -z $4 ] ; then # Getting Elapsed Time: tymPsd=${4%%|*} # Getting Refresh Time: # adding Auto-Closing TIMEOUT in seconds for this dialog/progress/bar/info msg box conf="$conf # auto close this dialog box after this second(s) *.autoclosetime = ${4#*|} " fi if [ ! -z $7 ] ; then # 1ST "ProgressBarNUMBER|nominator|denominator" for FILES # "progressBarNUMBER|CopiedNumberOrAmount|TotalNumberOrAmount" tV="${7#*|}" p1n=${tV%%|*} tV=${tV#*|} p1d=${tV%%|*} # Calculating the PERCENT-NUMBER for What % amount of FILES are so far Copied: # p1=$((200*$p1n/$p1d % 2 + 100*$p1n/$p1d)) p1=$(( ($p1n*1000/$p1d+5)/10 )) fi; if [ ! -z $8 ] ; then # 2ND "ProgressBarNUMBER|nominator|denominator" for DIRECTORIES # "progressBarNUMBER|CopiedNumberOrAmount|TotalNumberOrAmount" tV="${8#*|}" p2n=${tV%%|*} tV=${tV#*|} p2d=${tV%%|*} # Calculating the PERCENT-NUMBER for What % amount of DIRECTORIES/FOLDERS are so far Copied: # p2=$((200*$p2n/$p2d % 2 + 100*$p2n/$p2d)) p2=$(( ($p2n*1000/$p2d+5)/10 )) fi; if [ ! -z $9 ] ; then # 3RD "ProgressBarNUMBER|nominator|denominator" for SIZE # "progressBarNUMBER|CopiedNumberOrAmount|TotalNumberOrAmount" tV="${9#*|}" p3n=${tV%%|*} tV=${tV#*|} p3d=${tV%%|*} # Calculating the PERCENT-NUMBER for What % amount of DATA-SIZE/MegaBYTES are so far Copied: # p3=$((200*$p3n/$p3d % 2 + 100*$p3n/$p3d)) # p3=$(( ($p3n*1000/$p3d+5)/10 )) # We will add PERCENTAGE for FILES & DIRS SIZE, later # p3=0 fi; # PERCENT-AMOUNT CAN BE CONVERTED INTO A TEXT-BASED PROGRESS BAR SHOWN ON GUI DIALOG BOX EASILY, # we will improve it later, now lets focus on core/important functions, stability, security of other codes if [ "$cp" -eq 0 ] ; then oped="moved" fi; if [ "$tymPsd" -gt 60 ] ; then tymP="$(( $tymPsd / 60 )) minute(s) & $(( $tymPsd % 60 )) second(s)" else tymP="$tymPsd second(s)" fi; # Later, PERCENT % will be shown as a [****** ] based ProgressBar on this Pashua GUI dialog box L1="${1}ing...[return]" L2="From: \"$Src\"[return]" L3="To: \"$Dest\"[return]" L4="Total $p1d files & $p2d directories ( $pfCTS )[return]" L5="So far $oped: ${p1}% : $p1n file(s)[return]" L6="So far $oped: ${p2}% : $p2n directory(s)[return]" L7="So far $oped: Total Size calculation for Files & Dirs is now off[return]" L8="Time Elapsed/Passed since $1 started: $tymP[return]" L9="Info will be updated after ${4#*|}-seconds, so PLEASE WAIT..." # Adding text box(es) to show all info: conf=" # Introductory text txt1Prgrs.type = text txt1Prgrs.height = 180 txt1Prgrs.width = 500 txt1Prgrs.x = 35 txt1Prgrs.y = 200 txt1Prgrs.default = ${L1}${L2}${L3}${L4}${L5}${L6}${L7}${L8}${L9} " # txt2Prgrs.type = text # txt3Prgrs.type = text # txt4Prgrs.type = text pashua_run "$conf" "$PA_userBase" } # ======================================================== # bsd_command_check # Check that the required BSD command are installed # ======================================================== function command_check_msg { # Modified by atErik : adding 'local' local message1="One or more *BSD commands* to run Portable $appID were not found on \ this machine. You must install the BSD Subsystem package that is in the \ following folder on disk 1 of your Mac OS X installation DVD:\n/Welcome to Mac \ OS X/Optional Installs.\n\nNow quit." local button=` /usr/bin/osascript << EOT tell application "Finder" beep display dialog "$message1" buttons {"Quit"} \ with icon caution default button "Quit" set result to button returned of result end tell EOT` if test "$button" == "Quit"; then # Quit application exit 112 fi } function bsd_command_check { # written by Patrick Luby # Modified by atErik : adding 'local', wait df du cut tail find wc local commands="awk cp defaults diskutil echo grep ln mkfifo mkdir mv plutil ps rm sed sleep touch wait df du cut tail find wc" for i in $commands ; do if [ ! -x "/usr/bin/$i" -a ! -x "/bin/$i" -a ! -x "/usr/sbin/$i" -a ! -x "/sbin/$i" ] ; then # Return 96 + 16 if a command is not found command_check_msg; exit 112; fi done } # ======================================================== # osx_version_check # Check that the user is running Mac OS X 10.4 or higher # ======================================================== function version_check_msg { # Modified by atErik : adding 'local' local message1="You are running OS X version $version.\n\ Portable $appID can only be opened on Mac OS X 10.4 or higher." local button=`/usr/bin/osascript << EOT tell application "Finder" beep display dialog "$message1" buttons {"Quit"} \ with icon caution default button "Quit" set result to button returned of result end tell EOT` if test "$button" == "Quit"; then # Quit application exit 113 fi } function osx_version_check { # written by Patrick Luby # Modified by atErik : adding 'local' local version=""; if [ -x "/usr/bin/sw_vers" ] ; then # Return 96 + 17 if it is a bad version version=`/usr/bin/sw_vers | grep '^ProductVersion:' | awk '{ print $2 }'` case "$version" in 10.[0123]) version_check_msg ; exit 113;; 10.[0123].*) version_check_msg ; exit 113;; esac fi } # ======================================================== # quitApp # Check if local app is open and quit # ======================================================== function quitApp { # Modified by atErik : adding 'local' local rv=0; if ps cx | grep '[0-9] '"$appBin"'$' > /dev/null; then rv=` CDokMsg "$appID is already running on this system" \ "Only one copy can be run at a time. \ Quit runnig $appID and reopen Portable $appID." "--no-cancel" ` if [ "$rv" == "1" ] ; then # Quit application exit 0 fi fi } # ======================================================== # check_p_asf # Check and create Portable Application Support folders # ======================================================== function check_p_asf { # Modified by atErik : adding 'local' # "Read Only" string in till OsX 10.5 local readonly5=`diskutil info "$PA_userBase" | grep "Read Only" | awk '{ print $3 }'` # "Read-Only Volume:" string on OsX 10.6 local readonly6=`diskutil info "$PA_userBase" | grep "Read-Only Volume" | awk '{ print $3 }'` if [ "$readonly5" = Yes ] || [ "$readonly6" = Yes ]; then CDokMsgC "Portable $appID is on a locked volume" "Portable $appID can't \ be opened on a locked volume. Now quit." "--no-cancel" > /dev/null exit 0 else if [ ! -d "$PA_userPref" ] ; then mkdir -p "$PA_userPref" fi fi } # ======================================================== # copy_local_pref # Copy local preferences to Portable Application # ======================================================== function select_profile { # Modified by atErik : adding 'local', "chosen", PDfileOrDirSelect local rv=0; rvpf=` PDfileOrDirSelect "Select local $appID Profile folder" \ "Look for a folder named \"********.default\" or similar." \ "$userPrefBase" "directory" ` # rvpf=` "$CD" fileselect --title "Select local $appID Profile folder" \ # --text "Look for a folder named \"********.default\" or similar." \ # --select-only-directories --with-directory "$userPrefBase" ` if [ -f "$rvpf/prefs.js" ] ; then profilepath="$rvpf" export profilepath else rv=` CDokMsgC "$appID Profile folder not selected" \ "Sorry you have not chosen/selected $appID Profile folder. You have selected: \"$rvpf\". Try again?" ` if [ "$rv" == "1" ] ; then select_profile elif [ "$rv" == "2" ] ; then rv=` CDokMsg "Portable $appID now quit" \ "You have not chosen/selected $appID Profile folder, now Portable $appID quit." \ "--no-cancel" ` if [ "$rv" == "1" ] ; then # Quit application exit 0 fi fi fi } function runCopyPref { # written by Kevin Hendricks # Modified by atErik : converting codes for Pashua-dialog based PDprogressBar local pfTD=0 ; # Portable Firefox Total Dirs (Number of total Directories) local pfTF=0 ; # Total Files (Number of total Files) local pfTS=0 ; # "Dir+File Size Not-Counted" ; # Total Size of all Dirs & Files local pfCTD=0 ; # Total Number of Copied Dirs local pfCTF=0 ; # Ttl_Num of Copied Files local pfCTS=$pfTS ; # Total SIZE(MegaBytes/...) Copied Dirs & Files local pfCTP=0 ; # Number of seconds/Time Passed # local pfCTDp=0 ; # Percent % of Copied Dirs # local pfCTFp=0 ; # % of Copied Files # local pfCTSp=0 ; # % of Copied Dirs+Files SIZE local UniqNumbr=5 ; # an Unique Number (interger number), except "1" & except What Other OsxPortableFirefox Using local FIFO_pOsxFt="/tmp/pOsxFt${UniqNumbr}" ; # temp purpose fifo file-name . It needs to have an UNIQUE-NUMBER in filename local FIFO_pOsxFps="/tmp/pOsxFps${UniqNumbr}" ; # contains fifo file-name for Source-profile folder-name local FIFO_pOsxFpd="/tmp/pOsxFpd${UniqNumbr}" ; # ... Destination-profile folder-name local i=0 s=0 rm -f "/tmp/pOsxFt1" ; # a temp fifo to pass the UniqNumber number to sub-process mkfifo "/tmp/pOsxFt1" rm -f "$FIFO_pOsxFt" ; # remove previous fifo file (if it wasn't removed earlier) mkfifo "$FIFO_pOsxFt" ; # create a (temp) fifo file, as its persistent/accessible across different processes rm -f "$FIFO_pOsxFps" mkfifo "$FIFO_pOsxFps" rm -f "$FIFO_pOsxFpd" mkfifo "$FIFO_pOsxFpd" # Getting directory-location of profile from "profilepath" ENV Variable: rvpf="$profilepath" # Getting TOTAL-NUMBER of files & sub-dirs count, in SOURCE-PROFILE folder/directory, before copy-process: pfTD=`find "$rvpf/" -type d -print | wc -c` pfTF=`find "$rvpf/" -type f -print | wc -c` # For now, avoiding finding total size of all files+dirs, as it takes longer time: # pfTS=0 PDprogressBarDirsFilesCpOrMv "Copy|Copying $appID Profile" "$rvpf" "$PA_userPref" \ "${pfCTP}|$s" "-" "-" "p1|$pfCTF|$pfTF" "p2|$pfCTD|$pfTD" # "$CD" progressbar --indeterminate --title "Copying $appID Profile" \ # --text "Copying \"$rvpf\". Please wait..." < /tmp/hpipe & # FD = File Descriptor # exec 3<> /tmp/hpipe exec 3<> "$FIFO_pOsxFt" exec 4<> "$FIFO_pOsxFps" exec 5<> "$FIFO_pOsxFpd" exec 6<> "/tmp/pOsxFt1" # echo -n . >&3 echo -n "$rvpf" >&4 echo -n "$PA_userPref" >&5 echo -n "$UniqNumbr" >&6 # SECONDS=0 ; sleep 5 ; echo $SECONDS ; # output will be "5" after 5-seconds-of-sleep SECONDS=0 # Below section inside { ... } will be run under a different sub-process in background (to copy files) # below section can be another script-file too, & then it can be run/initiated/started by this function { # This is a sub-process section code, (it is to be run/executed in the background) # Obtaining data from fifo pipe(s): exec 6<> "/tmp/pOsxFt1" UniqN="$(< "/tmp/pOsxFt1")" wait # exec 6>&- # wait exec >"/tmp/pOsxFt1" # Deleting the fifo pipe(s): rm -f "/tmp/pOsxFt1" exec 4<> "/tmp/pOsxFps${UniqN}" srcProfile="$(< "/tmp/pOsxFps${UniqN}")" wait # exec 4>&- # wait exec >"/tmp/pOsxFps${UniqN}" rm -f "/tmp/pOsxFps${UniqN}" exec 5<> "/tmp/pOsxFpd${UniqN}" destProfile="$(< "/tmp/pOsxFpd${UniqN}")" wait # exec 5>&- # wait exec >"/tmp/pOsxFpd${UniqN}" rm -f "/tmp/pOsxFpd${UniqN}" # Below fifo/pipe we will use to transfer data back to the function which created this sub-process: exec 3<> "/tmp/pOsxFt${UniqN}" # Add your commands/work below, for which a progressive bar/info-msg box will be shown+updated: # At-end of your commands/work, write "pfC_done" or "pfC_fail" word/data into fifo/pipe # BEGIN all of your commands/work here: # cp -R "$rvpf/" "$PA_userPref" # cp -R "$srcProfile/" "$destProfile" && { echo -n "pfC_done" >&3 ; } || { echo -n "pfC_fail" >&3 ; }; cp -R "$srcProfile/" "$destProfile" && { echo -n "pfC_done" > "/tmp/pOsxFt${UniqN}" ; } || { echo -n "pfC_fail" > "/tmp/pOsxFt${UniqN}" ; }; # END of your commands. # deleting the fifo, which we were using to send "done"/"fail" msg wait exec >"/tmp/pOsxFt${UniqN}" rm -f "/tmp/pOsxFt${UniqN}" } & # ... Back to the Function which initiated/ran the above sub-process (in background) to Copy files. # when fifo/pipe still exists then delete each, except one fifo that we will monitor: sleep 1 if [ -p "/tmp/pOsxFt1" ] ; then exec 6>&- wait # sleep 1 exec >"/tmp/pOsxFt1" rm -f "/tmp/pOsxFt1" fi; if [ -p "$FIFO_pOsxFps" ] ; then exec 4>&- wait # sleep 1 exec >"$FIFO_pOsxFps" rm -f "$FIFO_pOsxFps" fi; if [ -p "$FIFO_pOsxFpd" ] ; then exec 5>&- wait # sleep 1 exec >"$FIFO_pOsxFpd" rm -f "$FIFO_pOsxFpd" fi; # Repeatedly check if background operation completed or not: while [ "$(< "$FIFO_pOsxFt")" != "pfC_done" ] || [ "$(< "$FIFO_pOsxFt")" != "pfC_fail" ] ; do i=$(( $i+1 )) # setting different update times for the PDprogressBar dialog case "$i" in (1) s=2; ;; (2|3|4) s=3; ;; (5) s=4; ;; (*) s=5; ;; esac sleep $s # Finding-out the number of files & dirs so-far copied into DESTINATION profile folder/directory: pfCTD=`find "$PA_userPref/" -type d -print | wc -c` pfCTF=`find "$PA_userPref/" -type f -print | wc -c` # pfCTS="Dir+File Size Not-Counted" pfCTP=$SECONDS # Finding PERCENT of files & dirs which are copied # pfCTFp=$((200*$pfCTF/$pfTF % 2 + 100*$pfCTF/$pfTF)) # pfCTFp=$(( ($pfCTF*1000/$pfTF+5)/10 )) # pfCTDp=$((200*$pfCTD/$pfTD % 2 + 100*$pfCTD/$pfTD)) # pfCTFp=$(( ($pfCTD*1000/$pfTD+5)/10 )) # pfCTSp=0 # Show updated info on PDprogressBar dialog box: PDprogressBarDirsFilesCpOrMv "Copy|Copying $appID Profile" "$rvpf" "$PA_userPref" \ "${pfCTP}|$s" "-" "-" "p1|$pfCTF|$pfTF" "p2|$pfCTD|$pfTD" if [ ! -p "$FIFO_pOsxFt" ] ; then break fi; # done < "$FIFO_pOsxFt" done # We will erase the last fifo with Unique number, which we were using to receive "done"/"fail" msg: if [ -p "$FIFO_pOsxFt" ] ; then exec 3>&- # wait rm -f "$FIFO_pOsxFt" fi } function check_asf { if [ -d "$PA_userPref" ] ; then # delete PA_userPref if it still exist rm -Rf "$PA_userPref" else mkdir -p "$PA_userPref" fi } # copy Preferences Folder function copy_pf { # Modified by atErik : adding 'local', PDbubble local userPrefSize=`du -hc "$userPrefBase" | cut -f1 | tail -1` local freeSize=`df -H "$PA_userBase" | tail -1 | awk '{print $4}'` local bUserPrefSize=`du -c "$userPrefBase" | cut -f1 | tail -1` local bFreeSize=`df "$PA_userBase" | tail -1 | awk '{print $4}'` local rv=0; if [ $bUserPrefSize -lt $bFreeSize ] ; then # Getting directory-location of profile from "profilepath" ENV Variable: rvpf="$profilepath" rv=` CDokMsg "Copy $appID Profile" \ "Your $appID Profile folder \"$rvpf\" is $userPrefSize. \ You have $freeSize available. Copy to Portable $appID?" ` if [ "$rv" == "1" ] ; then if check_asf ; runCopyPref ; then touch -f "$copy_pref" PDbubble "$appID Profile copied" \ "Local $appID Profile copied to Portable $appID with success." \ "$appICON" "20" # "$CD" bubble --title "$appID Profile copied" --text "Local \ # $appID Profile copied to Portable $appID with success." \ # --icon-file "$appICON" else PDbubble "$appID Profile copy error" \ "An error occurred copying $appID Profile to Portable $appID." \ "$cautionICON" "-" # "$CD" bubble --title "$appID Profile copy error" \ # --text "An error occurred copying $appID Profile to Portable $appID." \ # --icon-file "$cautionICON" --no-timeout fi fi else CDokMsgC "No space to copy $appID Profile" \ "Your $appID Profile folder is $userPrefSize. \ You have $freeSize available. There is not enough space. Portable $appID will \ open without copy existing $appID Profile." "--no-cancel" > /dev/null fi } function copy_local_pref { # Modified by atErik : adding 'local' local text="" local informativeText="" local rv=0 if [ ! -f "$copy_pref" ] && [ -d "$userPrefBase" ] ; then beep text="Copy local Profile" informativeText="Copy the existing $appID Profile \ on this system to Portable $appID?" rv=` PDmultiButtons "$text" "$informativeText" "$appICON" \ "button1_Copy" "button2_Don't_Copy" "button3_Never" ` # rv=` "$CD" msgbox --no-newline --icon-file "$appICON" \ # --text "$text" --informative-text "$informativeText" \ # --button1 "Copy" --button2 "Don't Copy" --button3 "Never" ` if [ "$rv" == "1" ] ; then select_profile copy_pf elif [ "$rv" == "3" ] ; then touch -f "$copy_pref" fi fi } # ======================================================== # bkup/recover cache bu=bkup=backup # BackUp existing cache # ======================================================== function bkup_cache { if [ -d "$userCache" ] ; then mv "$userCache" "$userCache.pabu" fi } function recover_cache { if [ -d "$userCache.pabu" ] ; then mv "$userCache.pabu" "$userCache" fi } function remove_p_cache { if [ -d "$userCache" ] ; then rm -rf "$userCache" fi } # ======================================================== # run # Open Portable Application # ======================================================== function run_app { "$PA_userBase/$appID.app/Contents/MacOS/$appBin" -profile "$PA_userPref" } # ======================================================== # open_p_app # Run Portable Application script # ======================================================== function set_p_app { bkup_cache # Backup exixting Cache folder } function close_p_app { remove_p_cache # Remove portable cache recover_cache # Restore existing cache } function open_p_app { # Modified by atErik : PDbubble if set_p_app ; then PDbubble "Portable $appID setup ok" \ "Portable $appID open with success." "$appICON" "-" & # "$CD" bubble --title "Portable $appID setup ok" \ # --text "Portable $appID open with success." --icon-file "$appICON" & else CDokMsgC "Portable $appID setup error" \ "An error occour while opening portable preferences. Now quit." "--no-cancel" > /dev/null close_p_app exit 0 fi run_app # Run application from external drive if close_p_app ; then PDbubble "Portable $appID quit" \ "Portable $appID quit with success." "$appICON" & # "$CD" bubble --title "Portable $appID quit" \ # --text "Portable $appID quit with success." --icon-file "$appICON" & else CDokMsgC "Portable $appID quit error" \ "Portable $appID can't restore local cache." "--no-cancel" > /dev/null fi } bsd_command_check osx_version_check check_p_asf quitApp copy_local_pref open_p_app exit 0

chrome://flags/#web-contents-occlusion chrome://flags/#calculate-native-win-occlusion

$ codesign -dvvv /Volumes/Chromium\ OS\ X\ 71.0.3578.98/Chromium.app /Volumes/Chromium OS X 71.0.3578.98/Chromium.app: code object is not signed at all

$ codesign -dvvv /Volumes/Chromium\ OS\ X\ 66.0.3359.139/Chromium.app Executable=/Volumes/Chromium OS X 66.0.3359.139/Chromium.app/Contents/MacOS/Chromium Identifier=org.chromium.Chromium Format=app bundle with Mach-O thin (x86_64) CodeDirectory v=20200 size=277 flags=0x0(none) hashes=3+3 location=embedded Hash type=sha256 size=32 CandidateCDHash sha1=15b4f375585379b2b142e4a97ae5883bb50c28ba CandidateCDHash sha256=ae2ebd3c3dd385cdd37a3137592a6a728c84e938 Hash choices=sha1,sha256 CDHash=ae2ebd3c3dd385cdd37a3137592a6a728c84e938 Signature size=8915 Authority=Developer ID Application: Carlo Gandolfi (66KW43FE5Q) Authority=Developer ID Certification Authority Authority=Apple Root CA Timestamp=May 1, 2018 at 8:07:50 PM Info.plist entries=31 TeamIdentifier=66KW43FE5Q Sealed Resources version=2 rules=13 files=174 Internal requirements count=1 size=184

$ open /Users/test/Desktop/Chromium.app/Contents/MacOS/Chromium ; exit; dlopen /Users/test/Desktop/Chromium.app/Contents/MacOS/../Versions/70.0.3538.110/Chromium Framework.framework/Chromium Framework: dlopen(/Users/test/Desktop/Chromium.app/Contents/MacOS/../Versions/70.0.3538.110/Chromium Framework.framework/Chromium Framework, 261): Symbol not found: _kSecAttrKeyTypeECSECPrimeRandom Referenced from: /Users/test/Desktop/Chromium.app/Contents/MacOS/../Versions/70.0.3538.110/Chromium Framework.framework/Chromium Framework Expected in: /System/Library/Frameworks/Security.framework/Versions/A/Security in /Users/test/Desktop/Chromium.app/Contents/MacOS/../Versions/70.0.3538.110/Chromium Framework.framework/Chromium Framework Abort trap: 6